Cracked and missing tile grout is a persistent headache for homeowners. To know things like how to fix cracked tiles and how to replace a broken tile are not common. But we are here to change it. This blog post will cover everything from grout repair to fixing holes in shower grout. You'll be well equipped with the knowledge of how to repair broken tiles in the kitchen, how to clean shower tile grout, how to fix uneven floor tiles without ripping, and more. Read on to find out.

Few things are quite as painful to seem at as grout that's chipping away around your otherwise perfect tiles. The only thing arguably worse is to truly call someone in to repair it for you, so if you're willing to urge your hands a touch dirty, it's a project you'll DIY. But how? That is what we are getting to tell you.


  • notched trowel
  • putty knife
  • rag
  • hammer
  • cotton swab
  • chisel
  • Materials

  • tile filler
  • matching paint
  • tile grout
  • tile adhesive
  • Grout Types

    Grout is out there as sanded or unsanded. Choose the right sort of grout to support the width of your tile joints and therefore the location of the repair.

    Measure the space between the tiles. If space is larger than 1/8 inch, use sanded grout. If the width is 1/8 inch or smaller, use unsanded grout.

    Never use sanded grout with metal, glass, or marble tile. The sand will scratch the surface. Instead, use unsanded grout.

    Acrylic latex grout is relatively easy to figure with but requires sealing. Epoxy grout is very immune to stains and doesn't require sealing but it's harder to use. Learn more about choosing grout and mortar.

    Important pre-project tip

    Make sure that any tiles next to the cracked grout aren't compromised and moving once you put pressure on them. Most of the time cracked grout is just that, just broken grout. But there’s also the prospect that the cracked grout stems from a tile that will have lifted from the bottom.

    So make certain to see your surrounding tiles to form sure none of them are affected. If they need, you’ll want to get rid of the tile and re-adhere it to the bottom.

    Try Applying Matching Paint

    Mix some matching paint (a paint store can match the color of your tile) with tile filler and dab it onto the crack with a cotton swab. Allow the tile filler to dry for a couple of seconds, then wipe lightly with a humid cloth. When you're done, the crack is going to be much less visible.


    If your grout has become chipped or stained, you'll get to remove it. For that task, you will need a grout remover. After removing the old grout, install new grout and seal it to attenuate future stains and damage.

    Try Replacing the Individual Tile

    If the tile is just too badly damaged to repair, you will have to get rid of it and replace it. Start by placing a rag over the damaged tile then shattering it with a hammer.

    Remove the tile chips with a chisel, and clean out the old adhesive with a spatula. Scrape around the edges of the remaining tiles to get rid of dust and debris which may get within the way of the replacement tile. Use a notched trowel to spread adhesive on the rear of the replacement tile, and set it in situ.

    Allow the adhesive to dry for the quantity of your time recommended by the manufacturer, then fill the grout lines with grout, available in squeeze tubes for minor repairs. After the grout dries, wipe the tiles with a humid cloth or sponge.