5 steps for testing stacked stone wall samples

Testing tips to stacked stone walls

First and foremost you must be thinking whether it is a good investment to spend the time, energy, and money on the stone wall. So let me clear it, this is absolutely a good investment that could be made.

Some of the tips to stack stone walls are prominent here. Take correct measurements before you stack the stones for the stone walls. You need to start from the bottom. It is important to first finish a single wall then move on to the next. Such that it's ensured that everything goes as your wish. If you're someone who doesn't believe in DIY projects then can go for skilled people as well. Make sure you hire some skilled and professional people for the work. Or you could also consult the other professionals as well.

Installation of the stacked stone on an interior wall

Well, this is not a difficult task even for the starters. Installation of the stacked stone on interior walls is super easy and quick. It's easy to fix the stacked stone to the interior walls. You just need a good quality tile adhesive and you're done with it. You've to apply the adhesive on the tile and make sure it sticks to your interior walls. However, if you're someone who doesn't believe in DIY projects then can go for skilled people as well.

Installation of the stacked stone for the exterior wall

Stacked stones are of two types flats and L-shaped. These pieces are fitted together and stuck to the wall. A quick tip just measures the area twice and adds 10% extra to the total square footage according to waste and cut. So the steps are easy to follow to install stacked stone for the exterior. Firstly you need some materials and equipment for the installation process. They are work gloves, eye protection, drop cloth, pencil, chalk line, level, etc.

Protect your flooring with a drop cloth. Then, prepare the wall to make sure it's clean, dry, and dust-free. Use of other base materials may require specialized preparation. Layout ledger out on the floor as this will fasten the installation process. Create a chalk line, prepare the chipset. Make sure you don't apply the thin-set until you're ready to start your project. Consistency should be firm and then Install the corner pieces of the wall. And then at the end apply the thinset to the back of the tile. Tap and press the tile to the exterior wall. The same procedure applies for the installation in the interior walls as well.